Secondary plastics recycling
1.Wet milling and and moisture eliminating equipment  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2. Plastic bag-to-granule recycling equipment  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3.Waste plastics granulation machine  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4. Hot cutting granulation machine  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5.Thin film attrition machine  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6.Used PP and PE film granulation line  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7. Used economic plastics granulation line |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8.Used plastic water circulation machine  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
9.WastePP and PE film granulation equipment  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Main technical parameters:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10.Machine for pressurized extrusion of granules  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
11.Twin-shaft extruder with SJSZ funnel  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Main specifications:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12. TSK type two shaft single side even rotation extruder
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
13.Plastic recycling equipment (uses hot cutting and aerial cooling)  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Main specifications
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
14. Automatic-fed plastics shredding machine  |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
SC-100 SC-100 automatic-fed plastics shredding machine is the most important part of granule production equipment// Raw materials for granules goes from the squeezer in the form of straps and granules, they they go to the water tray for cooling, then they are dragged in the pressing rollers, and go under speed rotating blades that crush them into granules. To crush the raw materials, a special strong cutting tooth of 65 mm is used. It efficiently decrease deformation and loading on the rotating blade, thus decreases wear and damage. At the same time, there is an adjusting hole in dragging and pressing roller of the machine. The hole can be adjusted to size requirements of plastic granulated plate .
Main specifications:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1. PVC SJPS-A
2. SJPS-C Plastic bottle recycling machine with degassing zone
3. CSJPS-C plastic recycling equipment (nylon and non-woven materials)
4. SJPS-DSJPS-D Foam plastic recycling equipment
Specifications
|
Model
|
Productivity (tons/month)
|
Location
|
Rod's diameter (mm)
|
Heater's power (kW)
|
Main unit's power (kW)
|
Cutter's power (kW)
|
|
SJPS-A
|
18-25
|
Set of equipment
|
120
|
5
|
7.5
|
1.1
|
|
SJPS-B
|
30-40
|
Set
|
150
|
6
|
15
|
1.1
|
|
SJPS-C
|
45-60
|
Set
|
180
|
8
|
18.5
|
1.5
|
|
SJPS-D
|
80-120
|
Set
|
250
|
10
|
24
|
1.5
|
Raw materials: used foam plastics
Final product:homogeneous granules of foam plastics.
16 Dewatering and granule extracting machine
Dewatering and granule extracting machine serves mainly for waste raw materials in recycling and plastic semi finished goods production. Machine has the functions such as dewatering, water diver-sion, slagging, because used films, bags, production wastes and various thermoplastics products be-come wet after washing (water content should not exceed 10%) and this can affect on obtaining level material for granules and also on size, compactness, transparence, and absence of air bubbles (for extrusion of granules from PE, PP and PVC) additional machines are required)
Main technical specifications
|
Model
|
SJP-100
|
SJP-120
|
SJP-130
|
|
|
Screw diameter(mm)
|
100
|
120
|
130
|
|
|
Screw rotations(rpm)
|
49/55
|
49/55
|
49/55
|
|
|
Engine power(kW)
|
11/15
|
15/18.5
|
30/37
|
|
|
Heating power (kW)
|
≤20
|
≤26
|
≤34
|
|
|
Productivity
|
Film raw materials(kg/hr)
Granule semi-finished products(kg\hr)
|
35
|
45
|
70
|
|
40
|
50~70
|
100
|
||
|
Outer size (mm)
|
2500×800×1000
|
3000×850×1050
|
3500×900×1100
|
|
|
Weight (kg)
|
850
|
980
|
1300
|
|
17.P lastics crusher
The crusher serves for crushing waste plastic products such as barrels, bottles, tubes, bags, cello films. The equipment has a lot of advantages such as good design, high productivity, long service life. Shredded films and silk balls do not wind on the rotating shaft. Sifter allows to receive crum-bled plastic secondary materials of various size and shape. During shredding of the used film, bags and balls, it is possible, if mount a mixer in lower part of the machine to make simultaneous shred-ding and purification of the materials. This shows versatility of the machine and its suitability for further operations with raw materials (patent L98 203051.7 19. large plastics crusher
Type of machine LU S-400 -20
Productivity 80—100kg/hr
Engine power 7.5--11 KW 380v four phases.
Weight 350kg.
Belt type 2000
Size 1400×900×1100
19.Washing crusher
Type LU S-400 -10
Productivity 300—500kg/hr
Engine power 5.5--11 KW 380v four phases.
Weight 450kg.
Belt type 2600
Size 1850×1800×1250
Type LU S-400 -10
Productivity 300—500kg/hr
Engine power 5.5--11 KW 380v four phases.
Weight 450kg.
Belt type 2600
Size 1850×1800×1250
20.Washing crusher
Type QLJ-100
Productivity 250kg/hr
Electric engine power 1.1 KW 380v four phases.
Weight 45kg.
Belt type A1420
Size 900×380×900
22. SF-300 type plastics crusher
Type QLJ-100
Productivity 250kg/hr
Electric engine power 1.1 KW 380v four phases.
Weight 45kg.
Belt type A1420
Size 900×380×900
21. SF-600 type plastics crusher
The crusher serves for crushing waste plastic products such as barrels, bottles, tubes, bags, cello films. The equipment has a lot of advantages such as good design, high productivity, long service life. Shredded films and silk balls do not wind on the rotating shaft. Sifter allows to receive crum-bled plastic secondary materials of various size and shape. During shredding of the used film, bags and balls, it is possible, if mount a mixer in lower part of the machine to make simultaneous shred-ding and purification of the materials. This shows versatility of the machine and its suitability for further operations with raw materials (Patent ZL98 203051.7).
Main technical parameters:
|
Model/Size
|
SF-300
|
SF-400
|
SF-600
|
|
Fixed blade\pc
|
2
|
2
|
2
|
|
Rotating blade\pc
|
3
|
3
|
5
|
|
Engine power.(kW)
|
7.5
|
11
|
22
|
|
Productivity(kg\hr)
|
40~120
|
50~200
|
100~350
|
|
Outer size (L W H )
|
1400×850×1350
|
1500×900×1550
|
1830×1240×1700
|
|
If there is a mixer (for washing raw materials)
|
|||
|
Stirrer's power (kW)
|
3
|
4
|
5.5
|
|
Rotations (rpm)
|
750
|
750
|
750
|
|
Outer size( L W H ) mm
|
1400×2250×1350
|
1500×750×1500
|
1830×2640×1700
|
|
Weight (kg)
|
325
|
660
|
1200
|